McGREGOR MET2523 Original Instruction Manual
  1. Manuals
  2. Brands
  3. McGREGOR Manuals
  4. Trimmer
  5. MET2523
  6. Original instruction manual

McGREGOR MET2523 Original Instruction Manual

250w
Hide thumbs
Table of Contents

Advertisement

Quick Links

ORIGINAL
INSTRUCTION
MANUAL
McGregor 250W
Grass Trimmer
7549540 (Model: MET2523 )
Important - Please read these
instructions fully before starting assembly
AFTER SALES SUPPORT
0345 605 2065
These instructions contain important information that will help
you get the best from your grass trimmer, ensuring it is assembled
correctly and safely. If you need help or have damaged or
missing parts, call the Customer Helpline on 0345 605 2065

Advertisement

Table of Contents
loading

Related Manuals for McGREGOR MET2523

Summary of Contents for McGREGOR MET2523

  • Page 1 ORIGINAL INSTRUCTION MANUAL McGregor 250W Grass Trimmer 7549540 (Model: MET2523 ) Important - Please read these instructions fully before starting assembly AFTER SALES SUPPORT 0345 605 2065 These instructions contain important information that will help you get the best from your grass trimmer, ensuring it is assembled correctly and safely.

  • Page 2: Table Of Contents

    Contents Safety information………………………..……………………………….........……………..3 In the box…………………………….……………………………………........…………….8 Assemble……………………………….…………………………………........……………….. 9 Prepare............................11 Operate............................12 Maintenance.............................15 Technical data.............................16 Accessories..............................17 Troubleshooting..........................17 Environmental protection..........................17 Getting help..............................18 Guarantee..............................18 Customer helpline 0345 605 2065...

  • Page 3: Safety Information

    Safety information Important - Please read these instructions fully before starting assembly Warning symbols The following warning symbols appear throughout this assembly manual and indicate the appropriate safety measures you should take when assembling and operating the grass trimmer. This symbol indicates there is a danger of serious personal injury or death if you do not observe the warning.
  • Page 4 Safety information Important - Please read these instructions fully before starting assembly Personal safety WARNING! Only operate the grass trimmer if you are wearing the correct Personal Protective Equipment (PPE) as described in the following warnings. Warning symbols The following warning symbols appear throughout this assembly manual and indicate the appropriate safety measures you should take when assembling and operating the grass trimmer.
  • Page 5 Safety information Important - Please read these instructions fully before starting assembly General safety WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
  • Page 6 Safety information Important - Please read these instructions fully before starting assembly Operational safety (continued) immediately. DO NOT TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY. Do not use the machine if the cord is damaged or worn. b) keep extension cords away from moving hazardous parts to avoid damages to the cords which can lead to contact with live parts.
  • Page 7 Safety information Important - Please read these instructions fully before starting assembly Operational safety (continued) of debris. j) Never fit metal cutting elements. k) Always be sure of your footing on slopes. l) Walk, never run. m) Not overreach and keep the balance at all times. n) Not to touch moving hazardous parts before the machine is disconnected from the mains and the moving hazardous parts have come to a complete stop.

  • Page 8: In The Box

    In the box Parts On/Off switch Spool head Main handle Flower guard Cable Motor housing Cable strain relief Locking knob Upper tube Front handle Telescopic shaft Spool head cover Lower tube Line cutter Safety guard Cap release latch (on both sides) Cutting line Line feed button Instruction manual...

  • Page 9: Assemble

    Assemble Assembling instructions Always take care when removing the packaging to prevent damage to you or to the grass trimmer. IMPORTANT! Before assembling the grass trimmer, check all the parts indicated in the manual are in the box. Inspect all the parts for signs of damage. Do not assemble the grass trimmer if you observe any damaged components.
  • Page 10 Assemble Assembling instructions 2. FITTING THE GUARD (See Fig. D1, D2, D3) 1) Remove the mounting screw from spool head, see FIG. D1. 2) Attach the safety guard to the trimmer head, align the guard so it slides into the slots located on the trimmer head, see FIG.

  • Page 11: Prepare

    Prepare Preparing instructions 1. MAINS SUPPLY CABLE STRAIN RELIEF (See Fig. F) In order to reduce strain on the cable inlet, form a loop and locate the cable around the cable strain relief. 2. ADJUSTUNG FLOWER GUARD Put the flower guard down before trimming, as shown in Figure G. Before trimming make sure the flower guard is locked firmly in position.

  • Page 12: Operate

    Operate Operating instructions WARNING: Always wear eye protection. Never lean over the trimmer head. Rocks or debris can ricochet or be thrown into eyes and face and cause blindness or other serious injury. When operat- ing unit, check for the following: Wear eye protection and heavy clothing.
  • Page 13 Operate Operating instructions 2. AUTOMATIC LINE FEED SYSTEM When initially switching on the trimmer, a small length of line is fed out. A ‘clattering’ noise will be heard when the lines hit the line cutter. DO NOT BE ALARMED, this is quite normal.
  • Page 14 Operate Operating instructions 5. WHEN REFITTING THE SPOOL CAP Keep all areas of the cap and spool holder clean. Refit the cap, pressing firmly down towards the spool holder to ensure cap is fully located. Check that the cap is correctly fitted by trying to remove it without depressing the two latches. 6.

  • Page 15: Maintenance

    Maintenance Maintenance Remove the plug from the socket before carrying out any adjustment, servicing or maintenance. Your power tool requires no additional lubrication or maintenance. There are no user serviceable parts in your power tool. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place.

  • Page 16: Technical Data

    Technical data Technical data table Model MET2523 Voltage 230-240V~50Hz Power input 250W No load speed 13000/min Cutting width 23cm Diameter of line 1.65mm Line length 1*3m Protection class Machine weight 1.3kg Noise and technical date A weighted sound pressure = 75.4dB(A)

  • Page 17: Accessories

    Accessories Safety guard Flower guard Troubleshooting General troubleshooting The following chart lists problem symptoms, possible causes and corrective action, if your electric grass trimmer does not operate properly. If these do not identify and correct the problem, contact your service agent. WARNING! Always switch the product off, disconnect it from power supply and let the product cool down before performing inspection, maintenance and cleaning work!

  • Page 18: Getting Help

    Getting help Customer helpline 0345 605 2065 Guarantee Dear Customer, In the unlikely event that your device develops a fault, please contact our Customer service department on the telephone number shown below. 1. These guarantee terms cover additional guarantee rights and do not affect your statutory warranty rights.

Table of Contents