McGREGOR MET2523 Original Instruction Manual page 10

Assemble
Assembling instructions
2. FITTING THE GUARD (See Fig. D1, D2, D3)
1) Remove the mounting screw from spool head, see FIG. D1.
2) Attach the safety guard to the trimmer head, align the guard so it slides into the slots located on the
trimmer head, see FIG. D2.
3) Secure the safety guard onto the trimmer head with the screw provided, see FIG. D3.
WARNING!
Never operate the tool without the guard properly in place. Use of the unit without having installed the guard
will cause the motor to overheat, and void the warranty.
D1
D3
3. REMOVING THE BLADE PROTECT LABEL (See Fig. E)
The blade is covered with a protect label. Please remove it before operation.
E
10
Take great care when doing this as the guard has a very sharp cutting edge.
D2
Customer helpline 0345 605 2065