McGREGOR MET2523 Original Instruction Manual page 7

Safety information
Important - Please read these instructions fully before starting assembly
Operational safety (continued)
of debris.
j) Never fit metal cutting elements.
k) Always be sure of your footing on slopes.
l) Walk, never run.
m) Not overreach and keep the balance at all times.
n) Not to touch moving hazardous parts before the machine
is disconnected from the mains and the moving hazardous
parts have come to a complete stop.
4. Maintenance and storage
a) Disconnect the machine from the power supply (e.g.
remove the plug from the mains) before carrying out
maintenance or cleaning work.
b) Use only the manufacturer's recommended replacement
parts and accessories.
c) Inspect and maintain the machine regularly. Have the
machine repaired only by an authorized repairer.
d) When not in use, store the machine out of the reach of
children.
5. Recommendation
The machine should be supplied via a residual current
device (RCD) with a tripping current of not more than 30
mA.
Customer helpline 0345 605 2065
7