Status And Statistics; Status And Alerts - D-Link DFE-570TX User Manual

Status and Statistics

At any time, you can instantly gauge the status of any port
in a Server Card array, and review performance statistics
on each array or individual ports.
information, reload the Network Control applet and view
the properties of the Server Card following the steps below.
1) Open the Network Control Panel applet and select the
Protocols tab.
2) Select Server Card and click on the Properties button.
The Server Card dialog should be displayed with two
tabs: Setup and Status.
3) Select the Status tab to display the current condition of
each port and throughput statistics for arrays or
individual ports. Throughput statistics can be viewed
on a per-second of cumulative basis. To toggle between
these two modes, use the pull-down window in the
center of the dialog. Also, throughput can be viewed for
individual ports of for the entire segment or array.
Choose the Segment array name for which you wish to
view statistics in the upper window or choose the
individual Server Cards within the array.

Status and Alerts

Within the Status dialog box, you can also view the status
The software keeps track of five different states for each
Server Card in an array.
To view the status
These states are represented
13