D-Link Vectra VEi7 Installation Manual

Pci ethernet adapter

Hide thumbs

page of 34

/ 34
Bookmarks

Quick Links

Download this manual

D-Link DFE-500TX ProFAST 10/100

PCI Ethernet Adapter

Installation Guide

Need help?

Do you have a question about the Vectra VEi7 and is the answer not in the manual?

Questions and answers

Summary of Contents for D-Link Vectra VEi7

Page 1 D-Link DFE-500TX ProFAST 10/100 PCI Ethernet Adapter Installation Guide...
Page 2 Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Page 3 General information to read before installing General information to read before installing On all systems: efore installing LAN card, go into Bios setup and set PnP OS field to NO. • How to change LAN card configuration if needed (Advanced users only) This is a general advisory on how to forcibly modify resources for ISA and PCI network cards.
Page 4 General information to read before installing 2 Press F2 to go to CMOS setup. 3 Set PNP OS to NO and reserve IRQ 5. 4 Save settings and boot to applicable OS.
Page 5 • Microsoft Windows 95 SR2.5 media. • Microsoft Windows NT Server 3.51 system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1400 DC00 E400...
Page 6 1 Installing the D-Link DFE-500TX ProFAST 10/100 PCI Ethernet Adapter Connecting to a Windows NT 3.51 Server 7 Upon rebooting, Windows 95 will recognize a “D-Link DFE-500TX PCI Fast Ethernet Adapter (Rev B/C)”. Insert the D-Link DFE-500TX driver disk and click on “OK”. 8 During the Update Device Driver process, point to the appropriate file locations (i.e.
Page 7 • Driver: DLKPCI.SYS, version 4.22.1 • Microsoft Windows 95 SR2.5 media. • Microsoft Windows NT Server 4.0 system that supports NetBEUI, NWLink IPX/SPX, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1400 DC00 E400...
Page 8 2 Installing the D-Link DFE-500TX ProFAST 10/100 PCI Ethernet Adapter Connecting to a Windows NT 4.0 Server 8 During the Update Device Driver process, point to the appropriate file locations (i.e. drivers disk or Windows 95 CD) to install the necessary files.
Page 9 • Microsoft Windows 95 SR2.5 media. • Novell NetWare 3.12 Server system that supports IPX network protocol. • Novell Client for Windows 95 v2.5 installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1400 DC00...
Page 10 3 Installing the D-Link DFE-500TX ProFAST 10/100 PCI Ethernet Adapter Connecting to a Novell NetWare 3.12 Server 7 Upon rebooting, Windows 95 will recognize a “D-Link DFE-500TX PCI Fast Ethernet Adapter (Rev B/C)”. Insert the D-Link DFE-500TX driver disk and click on “OK”. 8 During the Update Device Driver process, point to the appropriate file locations (i.e.
Page 11 • Microsoft Windows 95 SR2.5 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell Client for Windows 95 v2.5 installation media. • Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1400 DC00...
Page 12 4 Installing the D-Link DFE-500TX ProFAST 10/100 PCI Ethernet Adapter Connecting to a Novell NetWare 4.11 Server 8 During the Update Device Driver process, point to the appropriate file locations (i.e. drivers disk or Windows 95 CD) to install the necessary files.
Page 13 • Microsoft Windows NT Service Pack 4 media. • Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1400 DC00 E400...
Page 14 18 Select “Yes” at the prompt to shut down and restart your computer for the new settings to take effect. 19 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 20 Install the Hewlett-Packard Soft-Power Down application once the Service Pack 4 has been installed.
Page 15 • Microsoft Windows NT 4.0 Service Pack 4 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1080 DC00...
Page 16 18 Select “Yes” at the prompt to shut down and restart your computer for the new settings to take effect. 19 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 20 Install the Hewlett-Packard Soft-Power Down application once the Service Pack 4 has been installed.
Page 17 • Microsoft Windows NT 4.0 Service Pack 4 media. • Novell NetWare 3.12 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1400 DC00...
Page 18 7 Installing the D-Link DFE-500TX ProFAST PCI Ethernet Adapter Connecting to a Novell NetWare 3.12 Server 8 Highlight the adapter “D-Link DFE-500TX PCI Fast Ethernet Adapter (Rev B/C)” and click “OK”. 9 With “D-Link DFE-500TX PCI Fast Ethernet Adapter (Rev B/C)” listed in the “Network Adapters:”...
Page 19 7 Installing the D-Link DFE-500TX ProFAST PCI Ethernet Adapter Connecting to a Novell NetWare 3.12 Server 28 Install the Hewlett-Packard Soft Power Down application once the Service Pack 4 has been installed.
Page 20 • Microsoft Windows NT 4.0 Service Pack 4 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1080 DC00...
Page 21 8 Installing the D-Link DFE-500TX ProFAST PCI Ethernet Adapter Connecting to a Novell NetWare 4.11 Server 8 Highlight the adapter “D-Link DFE-500TX PCI Fast Ethernet Adapter (Rev B/C)” and click “OK”. 9 With “D-Link DFE-500TX PCI Fast Ethernet Adapter (Rev B/C)” listed in the “Network Adapters:”...
Page 22 8 Installing the D-Link DFE-500TX ProFAST PCI Ethernet Adapter Connecting to a Novell NetWare 4.11 Server 28 Install the Hewlett-Packard Soft Power Down application once the Service Pack 4 has been installed.
Page 23 • Microsoft Windows NT 3.51 Service Pack 5. • Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS transfer protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1400 DC00 E400...
Page 24 9 Installing the D-Link DFE-500TX ProFAST Ethernet PCI Adapter Connecting to a Windows NT 3.51 Server 8 From the “Drop Down List”, scroll down and select “<Other> Requires disk from manufacturer”, then click on “Continue”. 9 Set the path to “A:\” in the “Insert Disk” dialog box, and insert the D-Link driver disk.
Page 25 • Microsoft Windows NT Service Pack 5 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1080 DC00...
Page 26 10 Installing the D-Link DFE-500TX ProFAST Ethernet PCI Adapter Connecting to a Windows NT 4.0 Server 9 After Windows loads, go to the “MAIN” program group, and double-click on “Control Panel”. 10 Select the “Network” icon, and click “YES” to install NT networking. 11 Insert the Windows NT Workstation CD.
Page 27 • Microsoft Windows NT 3.51 Service Pack 5 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1400 DC00...
Page 28 11 Installing the D-Link DFE-500TX ProFAST Ethernet PCI Adapter Connecting to a Novell NetWare 4.11 Server 9 After Windows loads, go to the “MAIN” program group, and double-click on “Control Panel”. 10 Select the “Network” icon, and click “YES” to install NT networking. 11 Insert the Windows NT Workstation CD.
Page 29 • Microsoft Windows for Workgroups 3.11 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address DE00 DC00...
Page 30 12 Installing the D-Link DFE-500TX ProFAST Ethernet PCI Adapter Connecting to a Microsoft Windows NT 4.0 Server 10 Make sure that the “D-Link PCI Fast Ethernet Adapter [NDIS2]” is selected in “Network Drivers”. 11 At the “Network Drivers” window, click on “Close”. 12 At “Network Setup”...
Page 31 • Microsoft Windows for Workgroups 3.11 media. • Novell NetWare 4.11 Server system that supports IPX network protocols. • NetWare Client for DOS and MS Windows v1.21 installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1400 DC00...
Page 32 13 Installing the D-Link DFE-500TX ProFAST Ethernet PCI Adapter Connecting to a Novell NetWare 4.11 Server 10 Select option 6 “Highlight here and press <Enter> to install” and press “Enter” to begin installation. 11 When the installation is finished, remove the D-Link driver disk from the floppy drive and press <CTR><ALT><DEL>...

This manual is also suitable for:

Vectra vei8 Dfe-500tx profast 10/100