4.4. Hydraulic System
Drain all oil remaining in the hydraulic system before first start and fill the system with oil
•
recommended and used in the tractor connected to the machine.
•
Check the hydraulic system and cylinders for leaks every day and remove any leakages as
soon as possible.
Take care of the cleanliness of the cylinders and especially their piston rods.
•
Unfold the machine and set it in the parking position, and depressurize the system before
•
beginning any work at the hydraulic system.
•
Only connect and disconnect the hoses to and from the tractor when the hydraulic system is
depressurized.
Replace the hydraulic hoses after five years of operation of the machine at the latest.
•
4.5. Lighting
•
Check the correct connection of the 7-pin plug outputs before the first start.
Check the lighting, plug, wiring and lamps every day.
•
Check cleanliness of the reflector plates.
•
OPERATING AND MAINTENANCE MANUAL CROSS HP
- 25 -