Table of Contents
Advertisement
3.5.3. Heavy-Duty Tine, Type CX-A
•
Tines of CROSS HP feature automatic protection against overload in the form of a
compression spring.
•
Overload protection is preset to 5500N of the trigger force on the coulter share point.
•
Only trained personnel may disassembly the protection device.
Any intervention in the mechanism may result in serious personal injury or even death.
•
Check all screw connections around the tine and tighten any loose connections before each
•
use.
•
Measure the spring tension (compression) on a regular basis..
•
A sheared bolt [A], which breaks after exceeding a limit value is an additional safety measure.
OPERATING AND MAINTENANCE MANUAL CROSS HP
Fig. 11: Tine protection
THIS SETTING MUST NOT BE CHANGED!
USE ONLY GENUINE PROTECTION DEVICES!
- 17 -
Advertisement
Table of Contents
