Table of Contents
Advertisement
3.5.5. Adjustment of the Working Depth on the Support Wheel
•
Adjust by rotating the spindle A anticlockwise or clockwise to lift or lower the support wheel,
accordingly.
3.5.6. Lighting
Lighting is available as optional accessory
•
The rear lighting brackets can be set in transport and operating positions.
•
In order to change their position, release and remove the bolt [A] and shift the lighting
bracket manually.
•
Caution! Improper position of lamps during operation may permanently damage the
components.
•
Always change the position of the lamps after unfolding and before lowering the machine
onto the wheels.
OPERATING AND MAINTENANCE MANUAL CROSS HP
Fig.:14 Wheel depth adjustment
Fig. 15: Lighting
- 20 -
Advertisement
Table of Contents
