Adjustment Of The Working Depth Of The Disc Harrow Type A - UNIA CROSS HP Operating And Maintenance Manual

3.5.2. Adjustment of the Working Depth of the Disc Harrow Type A

Set the position of the harrow by turning the adjustment spindle handle accordingly: the
•
longer the spindle, the deeper harrow operation.
• The harrow should never operate deeper than the tines.
• The harrow is used for levelling the field surface after the tine section passage.
OPERATING AND MAINTENANCE MANUAL CROSS HP
Fig. 9: Adjustment of the drawbar cylinder
Fig. 10: Adjustment of the harrow type A
- 16 -