Software Upload Command - D-Link DCM-202 Configurations

D-link dcm-202 network-cable modem: software guide

Hide thumbs Also See for DCM-202:

Table of Contents

10. After logging in, in the MAIN> field, type the following command: dload

192.168.100.2 Hitr252.bin and press enter.

Please note that the 192.168.100.2 is the static IP set to the computer being used to

upload the software.

11. The TFTP server will show that the file has been transferred. After the software

loading finishes, the modem will restart. After it restarts, the Power light will be on,

Cable light will be blinking amber, the Ethernet LED will not show.

Note: The Ethernet light will come on, once the modem is connected to the High-

Speed Cable Internet Service Provider.

Table of Contents

Need help?

Do you have a question about the DCM-202 and is the answer not in the manual?