D-Link DCM-202 Configurations page 2
D-link dcm-202 network-cable modem: software guide
Hide thumbs
Also See for DCM-202:
- Manual (39 pages) ,
- Quick installation manual (37 pages) ,
- User manual (33 pages)
Advertisement
3. Under the General Tab, select Internet Protocol (TCP/IP). Then click on Properties.
4. In the Internet Protocol (TCP/IP) Properties, select Use the following IP address.
Fill in the following information:
IP Address: 192.168.100.2
Subnet Mask: 255.255.255.0
Click OK to set the IP address on to the computer.
Advertisement
