Using The Configuration Utility - D-Link MediaLounge DSM-622H User Manual

Using the Configuration Utility

The DSM-622H/624H is a true plug and play device. The DSM-622H/624H will be instantly
accessible to network computers with UPnP
However, if you wish to use the advanced configuration features that include assigning
folder and access rights; or if you want to use the DSM-622H/624H attached directly to
one computer, you can configure it.
The computer that you use for initial configuration must be directly connected
to the DSM-622H/624H with an Ethernet cable.
For Windows OS users:
Start your Web browser program.
If you do not have a DHCP server in your network:
Type the IP address of the DSM-622H/624H in the address field and press
Enter. Make sure that the IP addresses of the DSM-622H/624H and your
computer are in the same subnet. The default IP address of the
DSM-622H/624H is 192.168.0.65.
If you do have a DHCP server in your network:
Type http://dsm-622h into the address field and press Enter.
The screen below will appear.
For Macintosh OS users:
In Safari, go to Bookmarks > Show all bookmarks
Click on Rendezvouz.
Double-click on DSM-622H/624H.
The login screen will appear.
Enter the user name:
the password field blank. Once you've
logged in, you can set a password in
the Web-based configuration interface.
Once you have logged in, the Home screen, shown on the next page, will appear.
*Although your device may have a different product number than the one on these screens,
these images apply to all of the DSM-600 series of products, including the DSM-622H
and DSM-624H.
admin and leave
Click OK
™
compatible operating systems.
11