Software Setup; Easy Search Utility - D-Link DNS-321 User Manual

Section 3 - Installation
When first powered on, during the initial boot sequence, the DNS-321 will wait to be assigned an IP address via DHCP. If it does not
receive a DHCP assigned IP address, by default it will have a self-assigned IP address of 192.168.0.32. It is recommended to use the
included D-Link Easy Search Utility when accessing and configuring the DNS-321 for the first time. If you want to change the IP address
before logging in or if you are unable to connect to the DNS-321 IP address, you can use the Easy Search Utility provided on the product
CD to locate the device on your network and make any needed changes.
Network Storage The Easy Search Utility displays the available
Device: DNS-321 devices on the network.
Refresh: Refreshes the device list.
Click Configuration to access the Web-based
Configuration:
configuration utility of the DNS-321.
LAN: Configure the LAN Settings for the DNS-321
here.
Click Apply to save changes to the LAN
Apply:
Settings.
Drive: Volumes available for mapping are displayed
here.
Choose an available drive letter. Click Connect
Available Drive
to map the selected volume. Click Disconnect
Letters:
to disconnect the selected mapped volume.
Click Exit to close the utility.
Exit:
D-Link DNS-321 User Manual

Software Setup

Easy Search Utility

8