D-Link.storage.utility - D-Link ShareCenter Quattro DNS-345 User Manual

Section 1 - Product Overview
When irst powered on, during the initial boot sequence, the ShareCenter will wait to be assiend an IP address via DHCP.
If it does not receive a DHCP assigned IP address, the ShareCenter will be automatically assigned a 169.254.xxx.xxx
address. It is recommended that you use the included D-Link Storage Utility software when accessing and coniguring
the ShareCenter for the irst time. If you want to change the IP address before logging in or you have having trouble
connecting to the ShareCenter IP address, you can then use the Storage Utility software included on the product CD
to locate the device on your network and make any necessary changes.
The D-Link Storage Utility displays any
Storage Device ShareCenter™ devices it detects on the
network here
Click Refresh to refresh the device list
Click Coniguration to access the Web based
coniguration of the ShareCenter™
C o n f i g u r e t h e L A N S e t t i n g s f o r t h e
ShareCenter™ here
Click Apply to save changes to the LAN
Settings
Click Connect to connect to the iSCSI target
Click Management to edit the information
Volumes available for mapping are displayed
here
Choose an available drive letter. Click Connect
Letters to map the selected volume. Click Disconnect
to disconnect the selected mapped volume
Click About to view the software version of the
Easy Search Utility.
Click Exit to close the utility.
D-Link ShareCenter Quattro DNS-345 User Manual
D-Link Storage Utility
18