D-Link Storage Utility - D-Link ShareCenter DNS-320L User Manual

Section 2 - Getting Started
When first powered on, during the initial boot sequence, the ShareCenter will wait to be assigned an IP address via DHCP.
If it does not receive a DHCP assigned IP address, the ShareCenter will automatically assign a 169.254.xxx.xxx address. It is
recommended that you use the included D-Link Storage Utility software when accessing and configuring the ShareCenter for
the first time. If you want to change the IP address before logging in or you are having trouble connecting to the ShareCenter
IP address, you can use the Storage Utility software included on the product CD to locate the device on your network and
make any necessary changes.
Network Storage The D-Link Storage Utility displays any ShareCenter
Device: devices it detects on the network here.
Refresh: Click Refresh to refresh the device list.
Click Configuration to access the Web based configuration
Configuration:
of the ShareCenter.
LAN: Configure the LAN Settings for the ShareCenter here.
Click Apply to save changes to the LAN Settings.
Apply:
Drive Mapping:
Volumes available for mapping are displayed here.
Available Drive Choose an available drive letter. Click Connect to map
Letters: the selected volume. Click Disconnect to disconnect the
selected mapped volume.
About: Click About to view the software version of the Easy
Search Utility.
Exit: Click Exit to close the utility.
D-Link ShareCenter DNS-320L User Manual

D-Link Storage Utility

14