Table of Contents
Advertisement
5. Release the locking system to remove the glass
panels.
6. Turn the two fasteners by 90° and remove them
from their seats.
7. First lift carefully and then remove the glass
panels one by one. Start from the top panel.
90°
2
1
8. Clean the glass panels with water and soap.
Dry the glass panels carefully. Do not clean the
glass panels in the dishwasher.
When the cleaning is completed, install the glass
panels and the oven door.
Make sure that you put the glass panels (A, B and
C) back in the correct sequence. Check for the
symbol / printing on the side of the glass panel,
each of the glass panels looks different to make the
disassembly and assembly easier.
When installed correctly the door trim clicks.
A
B
Make sure that you install the middle panel of glass
in the seats correctly.
REPLACING THE LAMP
WARNING! Risk of electric shock.
The lamp can be hot.
1. Turn off the oven.
Wait until the oven is cooled down.
2. Disconnect the oven from the mains.
3. Put a cloth on the bottom of the cavity.
The back lamp
1. Turn the lamp glass cover to remove it.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300 °C heat-
resistant lamp.
4. Install the glass cover.
C
A
B
C
21
Advertisement
Table of Contents
