Table Of Contents; For Your Record; Important; Important Safety Instructions - Electric Mirror INTEGRITY Installation Instructions Manual

FOR YOUR RECORD

Dealer name: ___________________________________
Dealer phone: __________________________________
Purchase date: _________________________________
Installed by name: _______________________________
Installation date: ________________________________
It is strongly suggest you keep your sales receipt and
warranty details with this manual.

IMPORTANT

Read this document completely before your begin.
Carefully consider your level of expertise in installing
this product. Make sure you have the necessary tool.
Follow all precautions referred to in this document.
We recommend this product be installed and
configured by a trained installation expert.
These icons
identify important
details
Contents
For your Record .................................................................. 2
Important ............................................................................. 2
Important safety instructions............................................ 2
Keen Dimming .................................................................... 3
Wiring into the lighting fixture ........................................... 3
Connecting the Keen Unit ................................................. 4
Fluorescent Lamp Seasoning ........................................... 5
Wiring ................................................................................... 5
Mounting Troubleshooting ................................................ 6
Lamping Troubleshooting.................................................. 6
Power Troubleshooting ...................................................... 6
Warranty information ......................................................... 7
Warning: Installation shall be in accordance with the
applicable section of the National Electrical Code,
ANSI/NFPA 70, and/or the national Fire Alarm Code,
ANSI/NFPA 72, as applicable.
ATTENTION: THIS PRODUCT MUST BE
CONNECTED TO EARTH GROUND IN
ACCORDANCE\ WITH NEC CODE
250.20 (B). IMPORPER GOUND CAN
RESULT IN IRREGULAR FUNCTION OF THE

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions fully prior to installation.
2. Keep these instructions for future reference.
3. Install and operate in accordance with the
manufacturer's instructions.
4. Adhere to all warnings related to this guide and the
product.
5. All accessories and included hardware should be
considered the only options for installation.
6. Only the included hardware or related accessories
available in this package or from Electric Mirror are
specified as a genuine for the purpose of
installation or operations. No substitutes are
considered acceptable.
7. Do not place anything over the unit that blocks its
ventilation. Make sure the bottom of the unit is
free of obstructions.
8. Keep away from heat sources including open
flame.
9. Mirror glass can be very heavy. If dropped or
broken, it may crack or shatter, exposing
sharp edges than can inflict bodily harm if
proper care is not taken. At least two people
are recommended for installation.
10. This product requires an electrical earth ground for
proper electrical performance and safety
11. Keep liquids away from the electronics
components or mirrored substrates.
Accessory Installation of all accessories or related
products should be competed according to their
relative installation guidelines.
Caution
Follow these installation instructions completely
This product is intended for installation with
traditional building materials such as metal or
wood studs, drywall and connecting to copper
wiring.
2
UNIT.