Figure 109. Installing the heat sink and fan assembly
Figure 110. Closing the drive bay
5. Connect the microprocessor fan cable to the system board.
6. Complete the replacement. See "Completing the parts replacement" on page 74.
Replacing the microprocessor
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
CAUTION:
The heat sink and microprocessor might be very hot. Before you open the computer cover,
turn off the computer and wait several minutes until the computer is cool.
1. Remove the computer cover. See "Removing the computer cover" on page 23.
2. Remove the front bezel. See "Replacing the front bezel" on page 23.
64
ThinkCentre M720t User Guide and Hardware Maintenance Manual