5. Connect the new illuminated red dot cable to the system board.
6. Complete the replacement. See "Completing the parts replacement" on page 74.
Replacing the thermal sensor
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the computer cover. See "Removing the computer cover" on page 23.
2. Remove the front bezel. See "Replacing the front bezel" on page 23.
3. Disconnect the thermal sensor cable from the system board.
4. Replace the thermal sensor.
Figure 95. Opening the drive bay
Figure 96. Removing the thermal sensor
.
Chapter 4
Replacing hardware
57