How To Mount - Canon HD XS HJ14ex4.3B Operation Manual

2 HOW TO MOUNT

2-1. MOUNT THE LENS ON THE CAMERA
Before mounting the lens on the camera,make sure that the camera's power is turned off.
Locating Pin
Power/Iris
Control Cable
Camera
Bayonet Mount Ring
2-2. MOUNT THE HOOD ON THE LENS
The lens cap is attached to the lens at the factory. Please remove the lens cap befor mounting the
hood.
Hood Lock Knob
Hood
2-3. TURN IT ON
Turn on the camera,and the power of the lens will be supplied.
Secure
Lens Barrel
Index Mark
1
Remove the dust cap from the lens.
2
Align the lens locating pin to the groove on the camera
mount to fit the lens to the camera mount.
3
Turn the bayonet mount ring on the camera to secure
the lens.
4
Connect the power/iris control cable of the lens to the
camera.
NOTE
Never hold the lens, drive unit and band portion to
support the entire weight of the camera. Excessive force
to the mount portion and drive unit of the lens may result
in damage to the lens mechanism.
1
Fit the hood on the front of the lens barrel.
2
Align the index marks on the hood and lens barrel.
3
Tighten the hood lock knob.
E3
2 HOW TO MOUNT