Using The On-Screen Display (Osd) Controls - Lenovo ThinkVision T27h-2L User Manual

Using the On-Screen Display (OSD) controls

To adjust the settings, the user controls can be viewed through the OSD.
Monitor Controls
Advanced Settings
Port Settings
Menu Settings
Exit
Input Signal: HDMI
To use the controls:
1. Press to open the main OSD menu.
2. Use or
there is a sub-menu, you can move between options using
that function. Use
3. Press to move backwards through the sub-menus and exit from the OSD.
4. Press and hold
to the OSD. Press and hold
the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, Press and hold
disable / enable DDC/CI function. The words "DDC/CI disable" shows on the screen.
T27h-2L
Brightness
Contrast
Resolution: 2560 x 1440 Refresh Rate:
to move among the icons. Select an icon and press
or to make adjustments. Press
for 10 seconds to lock the OSD. This will prevent accidental adjustments
for 10 seconds to unlock the OSD and allow adjustments to
75
75
60Hz USB-CPowerDelivery:
to access that function. If
or , then press
to save.
65W
to select
for 10 seconds to
2-4
Chapter 2.