Adjusting Your Monitor Image; Using The Direct Access Controls - Lenovo ThinkVision T27h-2L User Manual

Adjusting your monitor image

This section describes the control features to adjust your monitor image.

Using the direct access controls

The direct access controls can be used when the On Screen Display (OSD) is not displayed.
Table 2-1. Direct access controls
Note:The T27h-2L uses Natural Low Blue Light Technology that reduces harmful blue light to
protect human eyes while maintaining picture quality in 6500K color temperature.
If you can't make sure the monitor already under Low Blue Light mode,
Just do Reset action in the OSD item Menu Settings
Icon Control
Exit
1
DDC-CI
Input Change
2 Increase
Up
Brightness
3
Decrease
Down
Menu
4
Enter
Description
Exit from menu and return before menu
Press and hold for 10 seconds to enable or
disable the DDC-CI function
Switches the video input source
For increasing the value on adjustment bar
Up key function and up circle
Direct access to Brightness adjustment
For decreasing the value on adjustment bar
Down key function and down circle
To access OSD menu
Press to confirm selection
Press and hold for 10 seconds will lock menu/
unlock menu
Press to enter next level on main menu/
sub menu status or enter previous level on
adjustment bar
Factory Reset.
2-3
Chapter 2.