Setup And Operation - Snailax SL-269 Use & Care Manual

Setup and Operation

1. Attach the massager to a chair with elastic straps or place it on other support.
2. Connect the adapter cable to the corresponding cable on the cushion.
3. Plug the home adapter into an outlet.
4. Turn on the device using the controller ( instructions on page 5 ).
5. When finished place the controller in the pouch at the side of the cushion.
6. The detachable intensity control flap lets you choose a softer or more intense massage.
7. You also may soften the massage pressure by placing a blanket or towel between yourself
and the device.
• This device will switch off automatically after 15 minutes timer run out.
• Do not setup or use the massager in a bathroom or similary wet / damp areas.
• Do not use this device while driving.
• For your own safety we equip the massager with a protection against over-heating.
Heat is created in the motors when placed under great stress and excessive pressure. Before
this could create any risk and after a runtime of 15 Minutes. The massager will switch off
automatically and will only allow switching on again after an appropriate downtime.
• Likewise, you should allow your body some rest periods. To avoid straining your muscles too
much, we recommend to not exceed a continuous massage of 15 Minutes.
3