Remote Start; Home Connect Settings - Siemens CS858GR.6B Instruction Manual

Remote Start

If you want to start an oven operation using your mobile
device, you must activate remote start.
Notes
"Remote start" is only visible if the Home Connect
■
Assistant has been successfully completed.
Note that some operating modes can only be started
■
on the oven itself.
Press the menu button.
1.
Touch "Remote Start".
2.
C appears in the display
Remote start is automatically deactivated in the
following situations:
The oven door is opened 15 minutes after remote
■
start is activated.
The oven door is opened 15 minutes after the oven
■
operation ends.
24 hours after remote start is activated.
■
When you start the oven operation on the appliance,
remote start is automatically activated. You can
therefore make changes on your mobile device or start
a new programme.

Home Connect settings

You can adjust Home Connect to suit your
requirements at any time.
In the Home Connect settings, press the l button
Note:
to display network and device information.
WiFi
If WiFi is activated, you can use the Home Connect
functions.
In the networked standby mode, your appliance
Note:
requires a maximum of 3 W.
Press the menu button
1.
Touch "Settings".
2.
Touch "Home Connect".
3.
Touch "WiFi" to switch the wireless module on or off.
4.
Disconnecting from the network
Y ou can disconnect your oven from the network at any
D i s c o n n e c t i n g f r o m t h e n e t w o r k
time.
If your oven is disconnected from the network, it
Note:
is not possible to operate the oven using Home
Connect.
Press the Menu button.
1.
Touch "Settings".
2.
Touch "Home Connect".
3.
Touch "Disconnect from the network".
4.
Connecting to the network
Press the menu button.
1 .
C o n n e c t i n g t o t h e n e t w o r k
Touch "Settings".
2.
Touch "Home Connect".
3.
Touch "Connect to network".
4.
Touch "Connect manually" or
5.
"Connect automatically".
Follow the notes in the section
6.
"Manual registration in the home network" or
"Automatic registration in the home network".
Connect to the app
If the Home Connect app is installed on your mobile
device, you can connect it to your oven.
The appliance must be connected to the network.
Note:
Press the Menu button.
1.
Touch "Settings".
2.
Touch "Home Connect".
3.
Touch "Connect to the app".
4.
Remote control
You can use the Home Connect app to easily access
the functions of your oven.
Notes
Operation on the appliance always has priority.
■
During this time, it is not possible to operate the
appliance using the Home Connect app.
The remote control is activated when the appliance
■
is first delivered.
If the remote control has been deactivated, only the
■
oven's operating statuses are displayed in the Home
Connect app.
The remote control is automatically activated when
■
the remote start is activated.
Home Connect
en
27