Download Print this page

D-link DPH-541 Quick Install Manual

Wireless voip phone.
Hide thumbs
   

Advertisement

Advertisement

   Also See for D-link DPH-541

   Related Manuals for D-link DPH-541

   Summary of Contents for D-link DPH-541

  • Page 2: System Requirements

    • An active subscription to a VoIP Broadband Phone Service It’s best to use the same wireless access point that your computer is connected to for configuring the DPH-541 phone when registering to your VoIP Broadband Phone Service. Package Contents • 802.11b/g Wi-Fi Phone...

  • Page 3: Hardware Overview

    Hardware Overview 1. Earphone 2. Screen 3. Keypads 4. Microphone 5. Antenna 6. Battery DPH-541 Quick Installation Guide 7. Volume adjustment keys 8. Earphone slot 9. Strap eyelet 10. Data cable slot...

  • Page 4: Getting Started

    8 hours. The battery charging status is properly performed only after uninterrupted charging/discharging. The battery heats up a bit during charging. This is not a malfunction. If the battery is completely exhausted, to be fully charged requires approximately three hours (with the phone powered off). DPH-541 Quick Installation Guide...

  • Page 5: Setting Up Your Phone

    Password! Please Create a New Password. Press OK, set a password, then press OK. 3. Select Network Profile and then press OK. The first available profile will be labeled Default. You have 6 profiles to choose from. 4. Highlight a profile and press Option. 5. Select Rename and press Select. Rename the profile then press OK. 6. Select Edit then press Select. Select Wireless Setting and then press Select. 7. Select ESSID and then press Select. 8. Select Site Survey and then press Select. 9. Select a wireless network you want to connect to and then press Set. The SSID that you set is now configured for the profile you created. 10. If the network you are connecting to requires encryption, press Back, select Security, and then press Select. 11. Select the type of encryption and then press Set. 12. Select the type or level of security and press Set. DPH-541 Quick Installation Guide...

  • Page 6

    6. Six profiles can be set in this feature. Only one profile can be activated at a time. The following information will be provided to you by your service provider. Below is an example: Preview: Detailed information is listed. Phone Number: 1-555-567-8910 Auth. ID: dlinkwins Auth. Passwd.: (Your Password) SIP Domain: wifiphone.com Proxy Addr.: The Address of your SIP Proxy IP: xxx.xxx.xxx. xxx Advance: The following options are indicated on the next page: DPH-541 Quick Installation Guide...

  • Page 7: Led Indicators

    10. Select Edit and press Select. Select Account Choice and press Select. 11. Select the SIP account you created and press Set. 12. Press Back until you are at the main screen. Your Wi-Fi connection should be activated. After activation and IP has been received the phone should register with your ITSP Provider. LED Indicator Lighting Seven Colors Blue Green Magenta DPH-541 Quick Installation Guide LED Indicators Status Continuously Rotating Blinking Blinking Solid Blinking Solid Blinking Reg. Timer (sec): 3600...

  • Page 8: Technical Support

    Copyright ©00 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective owners. Maximum wireless signal rate derived from IEEE Standard 0.11g specifications. Actual data throughput will vary.

Comments to this Manuals

Symbols: 0
Latest comments: