Table of Contents
Advertisement
Cleaning and care
Switching on the oven
lighting
Catalytic cooking compartment panels
Self-cleaning surfaces
Never use high-pressure cleaners or steam jets.
Risk of short circuit.
Never use caustic or abrasive cleaning agents.
These could damage the surface. If such an agent
gets on the front of the appliance, wipe it off
immediately with water.
Do not clean any surfaces of the appliance while they
are hot.
To make it easier to clean the oven, you can switch
on the oven lighting.
To switch on the lighting, press the function button for
oven lighting until it locks into place.
The catalytic cooking compartment panels are
coated with self-cleaning enamel.
The surfaces clean themselves while the oven is
in operation. Larger splashes will only be removed
after the oven has been used several times.
The rear and side walls are protected with catalytic
panelling.
Never clean these surfaces with oven cleaner.
Slight discolouration of the enamel does not affect
automatic self-cleaning.
44
Advertisement
Chapters
Table of Contents
