Electrical Connection - Midea MFS90CSS Instructions Manual

Electrical connection

• This appliance must be earthed by law. Before connecting the appliance to the
electrical supply, check that the earth system in your house is working correctly.
• Check that unit voltage and power, marked on the rating plate applied on the
appliance, are correct for the supply. It is necessary that the feeding network is
protected by a powerful switch able to disconnect completely the network with a
contacts separation of at least 3 mm. Be sure that the earth wire green/yellow is
not interrupted by the switch.
WARNING: THIS APPLIANCE MUST BE EARTHED
• In order to avoid hazard, any electrical work performed on this equipment or its
associated wiring should only be done by persons authorised by the
manufacture or similary qualified persons.
Replacement or mounting of the power cord
The mains cable is replaced via the rear backboard.
The mains cable must be of the following type:
380- -415V 3N~
H05 RR-F
H05V VV-F
H05 RN-F
H07 RN-F
5×2 2.5mm2
220-240V
H05RR-F
H05VV-F 3×4mm2
H05RN-F
H07RN-F
12