Fitting The Splash Guard; Positioning And Levelling - Midea MFS90CSS Instructions Manual

Fitting the splash guard

WARNING: This appliance is not suitable to be installed on a base

Positioning and levelling

Positioning the appliance
Depending on the model.
Proceed as follows:
- Remove the packaging and the protective film
from the splash guard.
- Screw the splash guard onto the rear of the
appliance using the 2 bolts.
- Not permitted use with lids or covers
aftermarket.
When installing the appliance, make sure that there
is enough space in the final installation location to
pull the appliance forwards for cleaning and
maintenance work.
The ground underneath must be hard and stable.
The wall immediately behind the appliance must be
made from non-flammable material, e.g. tiles.
If you need to pull the appliance in order to position
it, make sure that the adjustable feet are screwed
in fully.
Levelling the appliance
Level the appliance once all other work has been
completed.
To do this, turn the adjustable feet.
11