Advertisement
Flash pattern
Function
Red
Indicates an
unacceptable signal
strength level.
Yellow
Indicates a marginal
signal strength level.
Green (1 light)
Indicates a good
signal strength level.
Green (2 lights)
Indicates a very good
signal strength level.
Table 3.1: Signal strength LEDs description
Flash pattern Function
Normal State: Indicates
Flashes once
normal operation.
every 1 sec (blue)
ON Steady (blue) Communication Error
State: Indicates the
module is unable to
communicate on the
cellular network.
LED Trouble State:
OFF Steady
Module is not powered,
or some other trouble
condition prohibits
the module from
controlling the STATUS
LED. (Check for proper
installation.)
Table 3.2: STATUS LED descriptions
4 | Confi guration
Use Remote Programming Software (RPS) or
an SDI2 keypad to program the control panel
to use the module for communication.
For programming parameter descriptions,
options, and defaults refer to RPS Help or the
Program Entry Guide for your control panel.
For Bosch Cellular account status and
management, use RPS or the online service
portal (go to http://www.conettix.com/
Cellular.aspx and click on the Cellular Portal
Login link).
5 | Certifi cations
Region Agency
Certifi cation
US
FCC
FCC, Part 15 Class B Radiated/Conducted Emissions
Verizon
Open Development Certifi ed
UL
UL 365 - Police Station Connected Burglar Alarm Units and
Systems
UL 636 - Holdup Alarm Units and Systems
UL 864 - Control Units and Accessories for Fire Alarm Systems
UL 985 - Household Fire Warning System Units
UL 1023 - Household Burglar-Alarm System Units
UL 1076 - Proprietary Burglar Alarm Units and Systems
UL 1610 - Central-Station Burglar-Alarm Units
6 | Specifi cations
Dimensions
2 in x 3.68 in x 0.60 in (50 mm x 93.5 mm x 15.25 mm)
Voltage (operating)
12 V nominal
Standby current
35 mA
Alarm current
100 mA
Operating temperature
0°C to +49°C (+32°F to +120°F)
Relative humidity
Up to to 93% non-condensing
Cellular compatibility
EVDO rev A
CDMA2000
1xRTT
Included antenna
– Magnetic base omni-directional antenna
– 2.5 m (8.2 ft) cable with SMA connector
Compatibility
Control Panels
B9512G/B9512G-E/B8512G/B8512G-E
B5512/B5512E, B4512/B4512E, B3512/B3512E
The B440 is compatible with most Bosch control panels when
used with a B450 Conettix Plug-in Communicator Interface.
Refer to the Conettix Plug-in Communicator Interface (B450)
Installation and Operation Guide for complete control panel
compatibility listings.
Copyright
This document is the intellectual property of Bosch Security Systems, Inc. and is protected by
copyright. All rights reserved.
Trademarks
All hardware and software product names used in this document are likely to be registered
trademarks and must be treated accordingly.
Bosch Security Systems, Inc. product manufacturing dates
Use the serial number located on the product label and refer to the Bosch Security Systems, Inc.
website at
http://www.boschsecurity.com/datecodes/.
Conettix Plug-in Cellular
Communicator
B440
en Installation Guide
Bosch Security Systems, Inc.
Bosch Sicherheitssysteme
130 Perinton Parkway
GmbH
Fairport, NY 14450
Robert-Bosch-Ring 5
USA
85630 Grasbrunn
Germany
www.boschsecurity.com
© 2015 Bosch Security Systems, Inc.
F.01U.265.455 | 06 | 2015.05
Advertisement
