Advertisement
Basic Call Handling
Make an internal call
Dial extension number, or press extension key if
programmed
Make an external call
Dial '9' and telephone number
Dial by name
Type the 1
3 letters of name on QWERTY keypad,
st
the display will show names available; press the
(right arrow) to search and OK to dial
Receive a call
Lift receiver or press
Loudspeaker key to
answer hands free
Hold a call
Press Hold key in the screen of the handset
Retrieve a held call
Press the white key next to the musical note
in the screen
Transfer a call
Dial extension number, announce caller and
replace receiver, or press 'Transfer' Key
Transfer a caller into a mailbox
Whilst on a call dial * [Star] and the extension
number, replace receiver
Retrieve a call
(If extn busy or no reply)
Press the release
key and then the
re-connect
Last number redial
Press the redial
Redial List
Long press on the redial key
through list using the arrow keys, followed by OK
to dial
Further Telephone Features
Call back on a busy extension
Dial extension, display will show
Back key in the display
Cancel call back
Screen will show "Callback", press # key to cancel
Park a call
(External calls only)
Dial 12 or scroll down and press Park in the
screen [Display will show "Parking accepted"]
replace receiver
Retrieve parked call
Lift receiver, dial 12 and extn where call was
parked
Tannoy / Broadcast through the phones
Lift receiver, dial broadcast group number 41 –
48
3 way conference call
Whilst on a call, dial 3
Press Conf key in the screen
key to
key
and scroll
Wait
press Call
party, when they answer
rd
Exit conference call
Press Conf key in the screen press transfer key -
you will exit the conference and leave the others
talking or replace receiver to end conference
altogether
Pick up a specific extn
(In or out of group)
Lift receiver, dial 13 and ringing extn number
Pick up a call in your group
Lift receiver, dial 14 or press Pick up key
(The system will give you the longest ringing call)
Touch Tone dialling
When on a call, scroll down and press MF Code key
in the screen
(Text msg)
View a missed call
Press the key
which will be flashing red,
screen will say Voice Mails: 0 Text Mails: 1,press
down arrow, press Read Text key, display will say
"Call not answered", press OK, then press Call or
Clear in the screen
Forwarding your calls
(Setting a Divert)
Press the arrow key
in the top right hand
corner of the screen. Select the type of forward
required using the on-screen options and where
required enter the destination number.
When a forward has been set, the arrow will spin
around continuously.
To Cancel a forward, press the arrow key
select Canc Fwd
Program Personal Speed Dials
From the "Pers" tab, press the
spare key. Press Name and enter via the qwerty
keyboard. Press OK. Press Number, enter the
number and press OK to store
and
key. Select a
Advertisement
