Keyboard "Hot Key Commands; Optional Cable - D-Link DKVM-2 User Manual

K
EYBOARD
To send "Hot Key" commands to the DKVM-2/4 unit, press the
SCROLL LOCK Key twice within 2 seconds.
You will be given a beep as confirmation. Now press a command key
to give a "Hot Key" command. The following commands are supported:
F K
IRST EY
SCROLL LOCK
SCROLL LOCK
SCROLL LOCK
SCROLL LOCK
SCROLL LOCK
SCROLL LOCK
SCROLL LOCK
In Auto-Scan mode, the DKVM-2/4 unit will switch to the next
computer every 10 seconds. This means that all computers will be
shown on the monitor in a row, starting with the first computer after the
last one has been shown.
In this mode, there is no mouse or keyboard control, which is needed
to prevent errors. Erratic input will result if a mouse move or keyboard
key press is given just as the unit switches to the next computer.
To exit Auto-Scan mode, press the SPACE BAR. The DKVM-2/4 will
stop at the last computer shown.
O
PTIONAL CABLE
Model No. DKVM-CB 6 feet (180cm) 3 -in-one Cable kit is available for
DKVM-2/4 KVM switch. Visit www.dlinkshop.com for details.
"H K
OT EY COMMANDS
S K
ECOND EY
SCROLL LOCK
SCROLL LOCK
SCROLL LOCK
SCROLL LOCK
SCROLL LOCK
SCROLL LOCK
SCROLL LOCK
T K
HIRD EY
1
2
3
4
?
?
S
7
C
OMMAND
Switch to First PC
Switch to Second PC
Switch to Third PC
Switch to Fourth PC
Switch to Previous PC
Switch to Next PC
Go to Auto Scan mode