Video - D-Link DKVM-2 User Manual

§ Before booting up any PCs, the DKVM-2/4 unit must be
powered-up. But before powering the DKVM-2/4 unit up, the
mouse and keyboard must be connected. Any deviation from
this power-up sequence may lead to erratic behavior of the
systems.
V
IDEO
The image on my monitor is not clear. What can be the cause?
One of the following may be the case:
§ Please verify that all video cables are inserted properly.
§ It may be that your resolution or refresh rate is too high. Try a
lower refresh rate, or try lowering the resolution.
§ Your video cable may be too long. Video signals are high
frequency signals and are therefore subject to interference.
Please use video cables that are as short as possible.
§ Make sure that the power adapter is plugged in at both ends
and that it is working correctly. Its rating must be 9V 600mA.
10