Table of Contents
Advertisement
8-port Gigabit Ethernet Switch User's Guide
Port GVRP Settings
The following read-only window is used to configure the Port Group VLAN Registration Protocol (GVRP) on the Switch.
Items on the screen above include:
Port – The number of the port for which GVRP is to be Enabled or Disabled.
GVRP – For each corresponding port, GVRP can be Enabled or Disabled.
Port GMRP Settings
The following read-only window is used to configure the Port Group Multicast Registration Protocol (GMRP)
on the Switch. This function is not supported in the current version of the Switch software.
Items on the screen above include:
Port – The number of the port for which GMRP is to be Enabled or Disabled.
GMRP – For each corresponding port, GMRP can be Enabled or Disabled.
Multicasting
The following window enables you to set up Multicast forwarding on the Switch when you are in Layer 2 mode.
Figure 7-24. Port GVRP Settings screen
Figure 7-25. Port GMRP Settings screen
163
Advertisement
Table of Contents
Troubleshooting
