Table of Contents
Advertisement
Items on the screen above include:
Interface Name – The name of the IP interface (previously defined) on the switch for which a multicast
interface is to be configured.
IP Address – The IP address corresponding to the IP interface name.
Querier State – Select the version number of the IGMP to be used for the IP interface from the drop-down
list.
Query Interval – The time (in seconds) between the transmission of IGMP query packets.
Max Resp – The maximum number of respondents to an IGMP query. Range is between 1 and 25.
Robustness Var – The Robustness Variable is a numeric value between 1 and 255 defining the maximum
time (in seconds) between the receipt of IGMP queries. If this timer expires without the receipt of another IGMP
query, the Switch assumes the queerer is no longer present.
DVMRP Interface Configuration
The following window is used for the configuration of DVMRP on the Switch (Layer 3 mode only).
Figure 7-29. IGMP Interface Configuration screen
8-port Gigabit Ethernet Switch User's Guide
166
Advertisement
Table of Contents
Troubleshooting
