D-Link DGS-3308TG User Manual page 133

8-port Gigabit Ethernet Switch User's Guide
Figure 6-75. DNS Relay screen
The DNSR Status <Disabled> can be toggled between Disabled and Enabled using the space bar. Toggle the field to
Enabled, enter the IP address of Name Server 1 and Name Server 2, if so desired.
The DNSR Cache Status:<Disabled> can be toggled between Disabled and Enabled. This determines if a DNS cache
will be enabled on the switch.
The DNSR Static Table Lookup Status:<Disabled> can be toggled between Disabled and Enabled. This
determines if the static DNS table (entered on the DNS Relay - Static table configuration screen below) will be
used or not.
To make a static DNS table entry, highlight Static Table Configuration on the DNS Relay menu and press Enter.
123