Vlans - D-Link DGS-3308TG User Manual

Interface Name – A name given to identify this IP interface.
IP Address – The IP address of this IP interface (sometimes referred to as a network address).
Subnet Mask – The subnet mask for this IP interface.
VID – The VLAN ID of the VLAN corresponding to this IP interface.
Active – Allows this IP interface to be Active or Inactive on the Switch.
Port Member – Allows the selection of ports to be members of this IP interface and its corresponding VLAN.

VLANs

The following section describes how to set up IEEE 802.1Q VLANs on the Switch.
Items on the screen above include:
VLAN ID (VID) – The VLAN ID of the VLAN on which the static router port resides.
VLAN Name – The name of the VLAN for which ports are to be configured.
New – A link to the 802.1Q Static VLANs Entry Settings – Edit window.
Delete – Click this icon to delete an entry from this table.
802.1Q Static VLANs Entry Settings - Edit
The following window allows you to edit an 802.1Q VLAN on the Switch.
Figure 7-19. Edit 802.1Q VLANs screen
160
8-port Gigabit Ethernet Switch User's Guide