Table of Contents
Advertisement
[–] and [+] Keys
You can use the [–] (decrease) and [+] (increase) keys to
change the displayed number or value.
• Holding down either key scrolls the displayed setting.
• Pressing both keys at the same time will revert to the initial
default setting or the recommended setting.
[2] (o), [3] (p), [5] (EXIT), and [6] (ENTER)
Keys
Depending on the operation being performed, [2] (o), [3]
(p), [5] (EXIT), and [6] (ENTER) key operations are enabled
while the NUM indicator is not shown on the display.
[5] (EXIT) Key Long-press
After configuring function settings with the Function (cs)
button, you can exit the setting screen by long-pressing [5]
(EXIT). For details, see "FUNCTION Button (cs) Functions"
(page EN-40).
Categories
In the modes listed below the category (group) of the currently
selected type will be shown on the display. You can change
the category, if you want.
• Tones
• Rhythms
• Songs
• Music Presets
To check the current category
1.
Press bo CATEGORY.
Each press of bo CATEGORY selects the first number
of the next sequential category.
Category number
P i a n o
• After pressing bo CATEGORY, you can also scroll
forward and back between category names using the
dk [–] and [+] keys.
• If you do not perform any operation for a while after
displaying a category, the display will automatically
return to the previous screen.
2.
To return to the previous screen, press
cs FUNCTION.
• For information about the categories available in each
mode, refer to the "Category" column of the lists.
• You can directly scroll between top entries of categories by
holding down bo CATEGORY as you use the dk [–] and
[+] keys to scroll.
Category name
Returning the Digital Keyboard to
Its Factory Default Settings
Perform the following procedure when you want to return the
Digital Keyboard's stored data and settings to their initial
factory defaults.
See Function No.68 under "FUNCTION Button (cs)
Functions" (page EN-40).
General Guide
EN-5
Hide quick links:
Advertisement
Table of Contents
