Casio CT-X700 User Manual page 25

Turning Off Performance Evaluation
Use the following procedure to turn off performance
evaluation, which evaluates your performance and displays a
score for Lesson 2, Lesson 3, and No Guidance Play.
1.
Press cs FUNCTION and then use the ct [2]
(o) and [3] (p) keys to display "Lesson".
2.
Press the ct [6] (ENTER) key.
3.
Use the ct [2] (o) and [3] (p) keys to
display "Scoring".
S c o r i n
4.
Press the dk [–] key to select the off setting.
Changing the Phrase Length
If you have a song that is not divided into phrases for practice,
you can use the procedure below to specify the length of each
phrase you want to use to divide it.
1.
Press cs FUNCTION and then use the ct [2]
(o) and [3] (p) keys to display "Lesson".
2.
Press the ct [6] (ENTER) key.
3.
Use the ct [2] (o) and [3] (p) keys to
display "PhraseLn".
P h r a s e L n
4.
Use the ct number keys, and the dk [–] and [+]
keys to select a phrase length setting.
Setting
Number
1 Length of one phrase is one measure.
2 Length of one phrase is two measures.
3 Length of one phrase is three measures.
4 Length of one phrase is four measures.
5 Length of one phrase is five measures.
6 Length of one phrase is six measures.
7 Length of one phrase is seven measures.
8 Length of one phrase is eight measures.
g
Description
Using Built-in Songs to Master Keyboard Play
To simplify accompaniment
Simplifying accompaniment helps to make the lesson sound
easier to hear.
See Function No.42 under "FUNCTION Button (cs)
Functions" (page EN-40).
Specifying the Part Channel
The part channel provides part information that is used by the
functions below. If a song does not have any part channel
information, the current settings of these functions will be
used.
• Tone Sync
• Lesson Function (page EN-20)
See Functions No.59 and No.60 under "FUNCTION Button
(cs) Functions" (page EN-40).
EN-23