Pre-Installation; Planning Installation; Tools/Materials Required; Parts Required - Westinghouse QK042 Owner's Manual

Pre-Installation

PLANNING INSTALLATION

Unpack and inspect this product for chips, scratches, cracks, dents, and scuff marks. If any damages or defects are identified or, if any parts are
missing, please contact the manufacturer .
You may choose to install this sink either undermount (below the counter) or topmount (above the counter) . You must install this sink in a counter
at least 36 in . (914 mm) wide with a solid surface that has a minimum thickness of 3/4 in . (19 mm) .
Protect the entire surface of the product during installation to prevent damage .

TOOLS/MATERIALS REQUIRED

Measuring tape
Saber-saw or
Jig-saw
Silicone sealant
Flathead
screwdriver
Safety gloves
PARTS REQUIRED (NOT INLCUDED)
NOTE:
Parts not shown to actual size.
QK042
Plastic
Tail pipe (1)
flange (1)
4
Carpenter's square
Electric drill with 3/8 in .
(10 mm) drill bit and 1 in .
(25 .4 mm) and 1 3/8 in . (35 mm)
hole saw for faucet hole drilling
Pencil
Hacksaw
Connecting
nut (1)
Wrenches (2)
Pipe wrench
Thread Seal
Safety goggles
Supply lines (2)