H2oLabs 300F Instruction Manual page 5

CARAFE ASSEMBLY INSTRUCTIONS
Only tool required: Phillips, (Cross-Head) Screwdriver, (not included)
Note: Please use caution when handling the glass Carafe.
1. Remove the top of the water distiller, (Head Assembly), and remove
the package inside. Carefully pull out the glass Carafe.
2. Open the package and locate all parts as specified below:
Handle; Handle Cover; Lid; Nozzle with Glass Insert; Glass Carafe;
2-Stainless Steel Straps & 2 Phillips, (cross-head), Screws
3. Remove the screws and peel off the blue protective film on the
Stainless Steel Straps.
- 5 -