H2oLabs 300F Instruction Manual page 10

INCORRECT
4. When a new Activated Carbon Pod is to be used for the first time, dip
it in a cup of distilled water several times to remove the dust. The
activated carbon, (charcoal made from coconut shells), is harmless.
+
To install the Activated Carbon Pod, simply drop it into the Nozzle.
5. Carefully press and insert the
2 raised edges of the Nozzle
into the 2 slots under the
Distiller Water Outlet being
careful not to break the Glass
Insert. Note: See "Maintenance" section for additional
Activated Carbon Pod and Glass Insert instructions.
6. Line up the Nozzle with the spout of the
glass Carafe to collect the distilled water.
Position the Carafe accurately so that the
water will not drip on the side of the Carafe
or onto the countertop.
7. Plug the Main Power Cord in to the Main
Power Socket on the unit FIRST. And then plug the Main Power Cord
into your household electrical outlet LAST. Flip the main power switch
on the socket to on, ("I"). You are now ready to begin making water!
CORRECT
=
- 10 -