Electrical Precautions - H2oLabs 300F Instruction Manual

SAFETY INSTRUCTIONS - Read Before Operating
SCALDING DANGER!
▲Do not allow children or disabled people to operate the unit or come
in close proximity of it or the power cord.
▲Never remove the top of the distiller when it is on or for at least 30
minutes after it has turned off. Always allow the unit to cool before
removing the top of the unit to avoid potential hot water or steam
injury.
▲Do not allow any cord to hang over the counter which could get
tangled or caught resulting in the unit being pulled off of the
countertop.
▲Always operate the unit on a dry, flat, heat-tolerant surface, out of the
reach of children.

ELECTRICAL PRECAUTIONS:

▲To avoid the risk of arching or shorting, when connecting the Fan and
Main Power Cords, always plug in the Main Power Cord to the wall
outlet LAST. When disconnecting the Fan and Main Power Cords,
always unplug the Main Power Cord from the wall outlet FIRST.
▲Push plugs firmly all the way into the sockets to avoid a poor
connection that could result in arching.
▲Do not share the same outlet with other high-wattage appliances
while operating in order to prevent overloading.
▲Always unplug the Main Power Cord before filling or cleaning the
unit or whenever not in use.
▲Do not use extension cords unless absolutely necessary. However,
use of a power strip to protect against lightning strikes and power
surges is acceptable.
▲Never immerse any part of the unit in water, (except Carafe), and
keep the outside of the unit and plug sockets dry.
▲The unit turns off automatically upon completion. If you must
stop the process early, flip the main power switch to off, ("O"
position.)
▲Do not attempt to make any repairs to the unit. It should be repaired
only by an electrical appliance repair shop.
- 3 -