Motion Detection - D-Link DCS-950G User Manual

DCS-950G User's Manual

Motion Detection

Skip Time:
Motion Detection
Sensitivity:
Percentage:
Zone 1-3:
D-Link Systems, Inc.
Increasing the time set here will avoid false alarms. This option
allows you to set the amount of time between motion detection
events before the next recording will start.
Motion:
Click on the Motion button to enable motion detection.
Sets the measurable difference between two sequential images
that would indicate motion.
Sets the amount of motion in the window being monitored that
is required to initiate a motion detected alert. If this is set to
100%, motion is detected within the whole window to trigger
a snapshot. Note: Setting a higher sensitivity and a lower
percentage makes any motion more easily detected.
Click to open the corresponding motion window. To assign a
name to the window, enter the desired name in the entry field
next to the zone button.
Tools > Motion Detection
Using the Configuration Menu
44