Port - D-Link DCS-950G User Manual

DCS-950G User's Manual
Open MSD:

Port

Web Port:
D-Link Systems, Inc.
Saves the related settings of that window.
Save:
Click to open the Motion Screen Display. The MSD window
allows you to monitor the amount of motion detected in each
motion window. The graphic bars will increase or decrease
depending on the image variation. A blue bar means the image
variation is under the monitoring level, and no motion detection
alert is triggered. A red bar means the image variation is over
the monitoring level and a motion detected alert is triggered.
This is the port that allows the user to connect to the camera's
user interface. By default the port is set to 80.You may change
the port number if using multiple cameras.
Tools > Port
Using the Configuration Menu
45