Set Up A Dynamic Dns Service Account - TP-Link Archer C5400 User Manual
Wireless tri-band mu-mimo gigabit router archer c5400
Hide thumbs
Also See for Archer C5400:
- User manual (116 pages) ,
- User manual (120 pages) ,
- Quick installation manual (2 pages)
Table of Contents
Advertisement
Chapter 12
12. 5. Set Up a Dynamic DNS Service Account
Most ISPs assign a dynamic IP address to the router and you can use this IP address
to access your router remotely. However, the IP address can change from time to time
and you don't know when it changes. In this case, you might apply the DDNS (Dynamic
Domain Name Server) feature on the router to allow you and your friends to access your
router and local servers (FTP, HTTP, etc.) using a domain name without checking and
remembering the IP address.
Note:
DDNS does not work if the ISP assigns a private WAN IP address (such as 192.168.1.x) to the router.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
>
3. Select the DDNS
to select TP-Link so that you can enjoy TP-Link's superior DDNS service. Otherwise,
please select NO-IP or DynDNS. If you don't have a DDNS account, you have to
register first by clicking
Note:
To enjoy TP-Link's DDNS service, you have to log in with a TP-Link ID. If you have not logged in with one, click
4. Click
Register
in the
Domain Name
as needed.
Network
>
Dynamic
Service Provider
(TP-Link, NO-IP or DynDNS). It is recommended
Go to
register.
Domain Name List
Customize Your Network Settings
DNS.
if you have chosen TP-Link, and enter the
Log
in.
76
Advertisement
Table of Contents
