Configure To Support Iptv Service - TP-Link Archer C5400 User Manual

Chapter 12
• LACP active: enables LACP (Link Aggregation Control Protocol) unconditionally.
• LACP passive: enables LACP only when an LACP device is detected.
5. Specify two ports for link aggregation.
6. Click Save.

12. 3. Configure to Support IPTV Service

I want to:
How can
I do that?
Configure IPTV setup to enable Internet/IPTV/Phone service
provided by my internet service provider (ISP).
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or
the password you set for the router.
2. Go to Advanced >
3. If your ISP provides the networking service based on IGMP
technology, for example, British Telecom(BT) and Talk Talk in
UK:
1 ) Check the box for
Version, either V2 or V3, as required by your ISP.
2 ) Click Save.
3 ) After configuring IGMP proxy, IPTV can work behind your
router now. You can connect your set-top box to any of
the router's Ethernet port.
If IGMP is not the technology your ISP applies to provide
IPTV service:
Customize Your Network Settings
Network > IPTV.
IGMP Proxy and select the IGMP
73