TP-Link Archer C5400 User Manual page 24

Chapter 4
2 ) Dynamic IP(SLAAC/DHCPv6):
your ISP requires. Click
3 ) PPPoE: By default, the router uses the IPv4 account to connect to the IPv6
server. Click
Save and then click Connect.
Note:
If your ISP provides two separate accounts for the IPv4 and IPv6 connections, please untick the
session with IPv4 connection
Click
Save and then click Renew.
Advanced to input further information if your ISP requires. Click
checkbox and manually enter the username and password for the IPv6 connection.
Set Up Internet Connection
Advanced to input further information if
Use the same
20