Specify Dhcp Server Settings - TP-Link Archer C5400 User Manual

Chapter 12
Done!

12. 4. Specify DHCP Server Settings

By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and
the router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client
devices from the IP Address Pool. You can change the settings of the DHCP Server if
necessary, and you can reserve LAN IP addresses for specified client devices.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced >
¾ To specify the IP address that the router assigns:
1 ) Tick Enable
2 ) Select the appropriate
• Select Bridge
parameters are required.
• Select Custom
necessary parameters.
3 ) After you have selected a mode, the necessary
parameters, including the LAN port for IPTV connection,
are predetermined. If not, select the LAN type to
determine which port is used to support IPTV service.
4 ) Click Save.
5 ) Connect the set-top box to the corresponding LAN port
which is predetermined or you have specified in Step 3.
Your IPTV setup is done now! You may need to configure your
set-top box before enjoying your TV.
Network > DHCP Server.
Customize Your Network Settings
IPTV.
Mode according to your ISP.
if your ISP is not listed and no other
if your ISP is not listed but provides
74