System Log - TP-Link Archer C5400 User Manual

Chapter 13
¾ Forbid all devices to manage the router remotely:
Select Disable Remote Management
¾ Allow all devices to manage the router remotely:
1. Select Enable Remote Management for All
2. Enter Web Management Port
3. Click Save.
Devices on the internet can log in to
as http://113.116.60.229:1024) to manage the router.
Tips:
• You can find the WAN IP address of the router on
• The router's WAN IP is usually a dynamic IP. Please refer to
in to the router through a domain name.
¾ Allow specific devices to manage the router remotely:
1. Select Enable Remote Management for Specified
2. Enter Web Management Port
3. In Remote Management IP
manage the router.
4. Click Save.
Devices using this WAN IP can manage the router by logging in to
IP:port number (such as http://113.116.60.229:1024).
Tips:
The router's WAN IP is usually a dynamic IP. Please refer to
to the router through a domain name.

13. 11. System Log

When the router does not work normally, you can save the system log and send it to the
technical support for troubleshooting.
and click Save.
Devices.
(1024-65535 or 80).
http://Router's WAN IP address:port number
Basic > Network Maps
Set Up a Dynamic DNS Service Account
(1024-65535 or 80).
address, enter the IP address of the remote device to
Set Up a Dynamic DNS Service Account
Manage the Router
> Internet.
Devices.
http://Router's WAN
(such
if you want to log
if you want to log in
97