Cisco Nexus 93240YC-FX2 Hardware Installation Manual page 14

Overview
3 40-/100-Gigabit Ethernet QSFP28 ports (12)
4 Console port (RS232 port)
5 Management port (RJ-45 port)
1
10/25G-LR-S with QSA is not supported in Release 14.0(1)
To determine which transceivers, adapters, and cables this switch supports, see the
Compatibility Information
The following figure shows the hardware features seen from the power supply side of the chassis.
1 Screw holes (6) for attaching rack mounting
brackets
2 Grounding pad
Note
The limit of USB support is to USB 2.0 devices that use less than 2.5 W (less than 0.5 A inclusive of surge
current). There is no support for devices, such as external hard drives, that instantaneously draw more than
0.5 A.
You can order the fan and power supply modules with port-side intake or port-side exhaust airflow. The PSU
you order depends on whether you plan to position the ports in a hot or cold aisle. To determine the airflow
direction of the modules installed in your switch, see the following table.
Cisco Nexus 93240YC-FX2 NX-OS Mode Switch Hardware Installation Guide
4
8
9
document.
3
4
Screw holes (6) for attaching rack mounting
brackets
Grounding pad
Cisco Transceiver Modules
Fan modules (5) with fan slot 1 on the left and
fan slot 5 on the right
Two power supplies (one used for operations and
one used for redundancy) (AC power supplies
shown). Power supply slot 1 is on the left and slot
2 is on the right.
Overview